Here ‘s all it takes to model Game Boy, from installing new screen mods to general maintenance and cleaning of these retro devices.
Thanks to the regular distribution of screen kits and mod components, the Nintendo Game Boy the modding scene has grown rapidly in recent years. Building something as technically similar as navigating with internal console components can be daunting, but many Game Boy mods don’t require advanced knowledge, and modders can customize these beloved Nintendo retro consoles with only limited tools.
Despite being released in 1989, Game Boy has spawned a large modding community. It may be the relative simplicity of the device – which makes it easy to modify – or just a lot of gamers’ nostalgia for old – school Nintendo, but modders are always installing and developing new Game Boy mods. A prospective modder may just want a lighter screen or a different shell, but there are also mods for updated audio performance, light up buttons, and upgraded batteries. Of course, one could just buy an already used Game Boy, but many prefer to modify their own devices, as modding can be a fun, rewarding pastime.
Click on the button below to quickly start this article.
Before any mods are installed, however, almost all Game Boy must be disassembled and given a good cleanup. This requires either a Phillips head screwdriver or a three-wing screwdriver, depending on the review and model of the particular Game Guide. For cleaning, modders will need high-grade isopropyl alcohol and cotton swabs. Isopropyl alcohol evaporates very quickly, avoiding the potential contamination from other cleaning products, and cotton swabs can help get that alcohol into small back areas. Tight air can also remove dust in other difficult areas, and things like gloves and paper towels will also come in handy.
Another useful tool for Game Boys removal is the spudger – easily with a guitar pick – that can be used to separate plastic parts without scraping them. Tweezers (usually those with plastic or ceramic, so as not to damage electrical components), sandpaper, double-sided tape, and extra hook wires are often required for several modes, as are knives. crafts and flow cutters, useful for hard plastic trimming and wiring. Many mods require a soldering iron but not all mods; these are best with heat conditions that can be adjusted to an appropriate temperature. It is also recommended to have a GameBit screwdriver, which can be used to open Game Boy game cartridges.
Of course, modders need new parts and add-ons. These include shells, buttons, lights, and back-up screens, all widely available on the aftermarket in a variety of colors and materials. Thrown parts are also relatively easy to find and combine to create new treasure, allowing Game boy fans refresh childhood memories in a modern package.
